Important Notes:
- Sold individually
Front Fits:
- 1982-1983 Jeep CJ5 with 0"-1.5" Lift
- 1982-1983 Jeep CJ5 with 2.5" Lift
- 1972-1975 Jeep CJ5 with 2.5" Lift - 2WD ONLY
- 1954-1975 Jeep CJ5 with 2"-3" Lift
- 1955-1976 Jeep CJ6 with 2"-3" Lift
- 1972-1975 Jeep CJ6 with 2.5" Lift - 2WD ONLY
- 1982-1986 Jeep CJ7 with 0"-1.5" Lift
- 1982-1986 Jeep CJ7 with 2.5" Lift
- 1982-1986 Jeep CJ8 Scrambler with 0"-1.5" Lift
- 1982-1986 Jeep CJ8 Scrambler with 2.5" Lift
- 1963-1983 Jeep Wagoneer XJ with 0" Lift
- 1984-1991 Jeep Grand Wagoneer SJ with 0" Lift
- 1953-1975 Jeep M38A1 with 2"-3" Lift
- 1974-1983 Jeep J10 1/2 Ton Pick-up with 0" Lift
- 1974-1986 Jeep J20 3/4 Ton Pick-up with 0" Lift
- 1969-1973 Jeep Jeepster with 2"-3" Lift
- 1969-1973 Jeep Commando with 2"-3" Lift
- 1969-1973 Jeep C101 with 2"-3" Lift
- 1963-1973 Jeep Gladiator with 0" Lift
- 1972-1973 Jeep DJ5 Dispatcher with 2.5" Lift
Rear Fits:
- 1987-1995 Jeep Wrangler YJ with 0"-1.5" Lift
- 1976-1983 Jeep CJ5 with 0"-1.5" Lift
- 1972-1975 Jeep CJ5 with 2.5" Lift - 2WD ONLY
- 1954-1975 Jeep CJ5 with 2"-3" Lift
- 1955-1975 Jeep CJ6 with 2"-3" Lift
- 1972-1975 Jeep CJ6 with 2.5" Lift - 2WD ONLY
- 1976-1986 Jeep CJ7 with 0"-1.5" Lift
- 1976-1986 Jeep CJ8 Scrambler with 0"-1.5" Lift
- 1976-1983 Jeep Wagoneer XJ with 0" Lift
- 1963-1973 Jeep Wagoneer XJ with 0" Lift
- 1974 Jeep Wagoneer SJ with 2"-3" Lift
- 1984-1991 Jeep Grand Wagoneer SJ with 0" Lift
- 1945-1949 Jeep CJ2A with 2"-3" Lift
- 1946-1953 Jeep CJ3A with 2"-3" Lift
- 1952-1968 Jeep CJ3B with 2"-3" Lift
- 1953-1975 Jeep M38A1 with 2"-3" Lift
- 1941-1963 Jeep M38 with 2"-3" Lift
- 1941-1963- Jeep MB with 2"-3" Lift
- 1974-1983 Jeep J10 1/2 Ton Pick-up with 0" Lift
- 1974-1986 Jeep J20 3/4 Ton Pick-up with 0" Lift
- 1969-1973 Jeep Jeepster with 0" Lift
- 1947-1962 Jeep Jeepster Utility Wagon with 0" Lift
- 1969-1973 Jeep Commando with 0" Lift
- 1969-1973 Jeep C101 with 0" Lift
- 1963-1973 Jeep Gladiator with 0" Lift
- 1947-1962 Jeep Gladiator Utility Truck with 0" Lift
- 1972-1973 Jeep DJ5 Dispatcher with 2.5" Lift
Description:
This Rancho Front or Rear Monotube Nitro Shock features a high pressure gas charge that separates the unit's internal oil and nitrogen to offer additional spring rate. This shock is engineered to provide better handling, control and performance on vehicles with higher centers of gravity. A hydraulic lockout to cushion the impact when the vehicle suspension is fully extended is another enhancement of ride handling characteristics.
Product Details:
- 1.97" (50mm) body diameter
- Monotube design with high pressure nitrogen gas charge
- Off-road fluon banded piston
- Brushed and zinc plated with clear coated finish
- Ten-stage velocity sensitive valving
- 46mm bore monotube construction
- 14mm hardened steel rod
- Black natural rubber bushings
Parts Included:
- (1) Front or Rear Monotube Nitro Shock - RS7000MT Series
- (1) Protective Boot
