- **TRUCK FREIGHT IS REQUIRED AND WILL BE QUOTED UPON RECEIPT OF ORDER.**
- The Stretch System is designed for flat fender and stretch rear corner use. This will require body work.
- Welding of the Rear Cradle, Rear Third Link Mount, Front and Rear Long Arm Mounts is required.
- Removal of the OEM lower control arm mounts front and rear is required.
- Removal of the front upper control arm mount on the driver side is required.
- Minor exhaust rerouting required before the collector on the driver's side. This is recommended to be done prior to the suspension system being installed.
- Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up.
- 4.5" of back spacing is recommended on rims for 35" tall tires.
- 3.5" of back spacing is recommended on rims for 37" tall tires.
- Will ride firmer than a system with bushings in the control arms, but will also handle tighter.
- The rear upper third link is designed around standard low pinion rear axles. When ordering for high pinion rear axles please contact us directly so we can ensure proper fitment as best as possible.
Product Info
Important Notes
Description
Rock Krawler's 2.5" Stage 1 Off-Road Pro Long Arm System Lift Kit with 3" Rear Stretch is a race inspired system designed to minimize wear points while taking off-road abuse. All ends of the control arms feature the Pro Series Krawler Joints so there are no bushings to break down from punishment. The suspension geometry features a tried and true independent 3 link design front and rear. There are no natural binding points, so the suspension cycles perfectly smooth. No system on the market today is ready for racing or absolute punishment like the Rock Krawler Off-Road Pro Long Arm System.
Product Details
- Built for Taking Abuse - Period
- Race Proven Suspension System
- 7075-T6 Aluminum Control Arms
- Independent 3 Link Conversion Front and Rear (100% Bind Free Suspension)
- Adjustable Rear Anti Squat
- In Vehicle Adjustable Front Upper Arm making Alignment a Snap
- Long Travel Functional Multi Rate Coil Springs
- PRO Front Sway Bar Disconnects/Extended Links
- PRO Rear Extended Sway Bar Links
- Sport Tuned 2.0 RRD Spec'd Prodigy Shocks
- Repositions the Rear Axle Back up to 3" Over Stock
- 35" Tires (OEM Fenders)
- Up to 37" Tires (Flat Fenders)
- Abuse Proof Lifetime Warranty on All Hard Parts
- Upgradeable to Coil Overs
Parts Included
- (2) Front 2.0" Emulsion Shocks
- (2) Rear 2.0" Emulsion Shocks
- (2) Front Coil Springs
- (2) Rear Coil Springs
- (1) Double Adjustable Front Track Bar
- (1) Double Adjustable Rear Track Bar
- (2) Front Double Adjustable Lower Control Arms
- (2) Rear Double Adjustable Lower Control Arms
- (2) High Misalignment Adjustable Upper Control Arms
- (2) Adjustable Front Sway Bar Disconnects
- (1) Front Long Arm Mount
- (2) Rear Long Arm Mounts
- (1) Cross Member
- (2) Full Replacement Rear Track Bar Relocation Brackets
- (2) Weld On Offset Rear Axle Spring Pads
- (1) Rear Independent 3rd Link Mount
- (1) Weld On Rear Axle Cradle With Adjustable Anti-Squat
- (2) Rear Extended Sway Bar Links
- (2) Front Long Travel Stainless Steel Brake Lines
- (2) Rear Long Travel Stainless Steel Brake Lines
- (2) Sway Bar Straps
- (4) Extended Bump Stops
- Installation Hardware and Detailed Instructions
Additional Info
| SKU | ROCK-JK25ORP-3S1 |
|---|---|
| Manufacturer Part Number | JK25ORP-3S1 |
| Brand | Rock Krawler |
| Part Type | Suspension Lift Kit |
| SKU Aliases | JK25ORP-3S1 |
| Finish | Bare |
| Lift Height Range | 2-3 in. |
| Lift Kit Height Range | 2-3 in. |
Installation Guide Download
What It Fits
| Years | Make | Model |
|---|---|---|
| 2007-2018 | Jeep | Wrangler JK |
Installation
Installation Guide Download
