This super-wide, industry-leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment.
The PDX-V9 is 20% thinner than previous models at only 2" thick. The new stacking system packs the amplifier closer together so there are no gaps and to save space in the trunk while directly coupling the amps heatsinks to help share cooling duties.
The PDX-V9 has the input capability to add the optional RUX-KNOB.2 Remote Bass Control Knob for quick bass adjustments when needed.
The PDX-V9 comes with removable trim rings, allowing them to be easily custom painted to match your vehicle or personalized to anything you want.
Uniquely, the PDX-V9 distortion actually decreases at higher frequencies, resulting in a clean and clear signal where your ear is most sensitive to distortion.
The PDX-V9 is capable of unheard of S/N ratios for extremely clean, uncolored sound. Forget unwanted background noise or static. The PDX-V9 delivers crystal clear music every time.
With ultra-low output impedance, this amplifier offers extremely controlled, tight bass for unprecedented sound quality.
The PDX-V9 incorporates Alpine's new Power Management circuit. The Power Management Processor controls all aspects of amplifier performance, monitoring voltage, temperature, and output to ensure uninterrupted power output for non-stop listening.
Product Details:
- Connectors: Quick Connect Terminals for Power Supply and Speaker Output
- Terminal Layout: One-Sided
- Mounting Design: Easy Stacking and Smart Installation
- Amplifier Type: Class-D (Digital)
- Channel Design: 4-channel + 1-channel (Mono)
- Power Supply Design: DC-DC PWM Power Supply
- Pre-Amp Stage: Discreat
- Final Outputs: MOSFET
- Crossover: Variable High Pass, Low Pass and Band Pass Filter
- Gain Control: Continuously Adjustable Gain Control
- Subsonic Filter: Variable Subsonic Filter
- Bass Control: Remote Bass Control (RUX-KNOB) Ready
- Low-battery Protection: Low-battery Protection
- Low-impedance Possibility: Low-impedance Possibility
- Current Protection: Over-Current, Over-Voltage and Thermal Protection
- Board Circuitry: S.T.A.R. Circuit
- Board Design: 6-layer Glass Epoxy PC Board
- Power Indicator: Top Mounted LED Power/Status Indicator
- Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)
- Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)
- Thermal Control: Thermal Management Control
Specifications:
- CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N)
- Max Power: 1600W
- Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)
- Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)
- Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N)
- Crossover Frequency (CH1/2, HPF): 30 - 600 Hz (x1), 300 - 6k Hz (x10), -12 dB/oct.
- Crossover Frequency (CH3/4, HPF): 30 - 600 Hz (x1), -12 dB/oct.
- Crossover Frequency (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6k Hz (LPF), -12 dB/oct.
- Crossover Frequency (Subwoofer): 50 - 600 Hz, -24 dB/oct.
- Subsonic Filter: 3 - 30 Hz, -24 dB/oct.
- Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm
- Foot Print (WxHxD) in: 10-1/8" x 2" x 7-1/2"
- Power Requirements: 14.4 V.DC (11-16 V allowable)
- Input Sensitivity (RCA Input): 0.2 - 4 V (CH1/2, CH3/4), 0.1 - 4 V (Subwoofer)
- Input Impedance: >10k ohms
- Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 3 - 100k Hz
- Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 3 - 600 Hz
- THD+N (10W into 4 Ohms) for CH-1/2/3/4: <0.005 %
- THD+N (10W into 4 Ohms) for Subwoofer: <0.006 %
- THD+N (Rated Power into 4 Ohms) for CH-1/2/3/4: <0.03 %
- THD+N (Rated Power into 4 Ohms) for Subwoofer: <0.05 %
- Damping Factor for CH-1/2/3/4: >500 into 4 ohms at 100Hz
- Damping Factor for Subwoofer: >1000 into 4 ohms at 100Hz
- Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 112 dB
- Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 119 dB
- Weight: 2.7 kg
