- Recommended weld with axle suspended not under load of vehicle. Only weld to cast if you are experienced in the process, welding to cast is not required. 1 inch minimum bump stop extensions required to clear factory exhaust.
Description:Although less common than the front, the JK rear axle is known to bend causing a costly axle replacement. The EVO MFG JK ProTek Rear Axle Truss is designed to give a rigid support connecting both driver and passenger side axle tubes via a one piece truss system contouring the differential center section making no need to weld to the differential casting which requires a specialty welding process for proper adhesion.
- This gives full side to side axle tube support.
- Manufactured from laser cut 3/16 steel and CNC press brake formed in one piece to minimize welding labor, excess heat, and axle warpage."
- (1) Axle Truss
|2007-2018||Jeep||Wrangler JK Unlimited|