- Drilling of the passenger side steering knuckle with 13/16" drill bit is required to complete the install.
Description:When EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration. Fatigue to occupants, Reliability, Functionality, Affordability. For the challenge we deemed the EVO MFG ENFORCER Suspension package. We Smoothed and Balanced the Overall Ride Quality with EVO MFG Plush Coils Front Adjustable Lower Control Arms to correct caster angle with EVO MFG on Vehicle Adjusters / Stage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle/ Stage3 includes all 8 Adjustable Control arms for full suspension tuning. Rear Roll Center correction trackbar bracket. All stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3" or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. Raises trackbar mounting location 3" at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling of the vehicle on and off road. Integrated new steering stabilizer location built in to get it up and out of harm's way above the tie rod.
- Stainless Steel Brakelines
- All necessary hardware included
- Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket
- Comes complete with new forged draglink
- All bracketry made from 3/16 thick laser cut and CNC bent sheet metal
- (4) Springs
- (4) Control Arms
- (1) Track Bar
- (4) Brakes Lines
- Brackets, Spacers and hardware
|2007-2018||Jeep||Wrangler JK Unlimited|
|Maximum Tire Size||35"|
|Suspension Type||Coil Spring|