We've now added the new OR-Fab Stinger bumpers for the Jeep Wrangler JK models to our inventory here at Morris 4x4 Center. Customers have come to depend on OR-Fab parts and bumpers
to get their Jeeps in and out of tough places for years. And this new bumper is just as durable and dependable as their past products. NEWS FLASH: Morris 4X4 Center will be at the Jeeptoberfest, October 18 – 19, 2014, in Ocala, Florida and for this event, while you’re there, check out the great OR-FAB products, because we have a triple play of savings: Order any OR-FAB product at our tent and receive 10% OFF, Free shipping and a FREE Morris 4×4 T-Shirt! See Details Here>>>
OR-Fab's new Stinger bumpers provides superior protection during extreme angle ascents and descents. Their stubby design maximizes tire clearance and approach angles and features a gusseted, heavy-duty front stinger style hoop. The Stinger model bumpers features a low profile, recessed, centered fairlead winch mount that allows maximum airflow to the radiator. There are no short cuts when you're stuck, and you need to get out of situation that can go from bad to worse at a seconds notice. As a Jeep owner, and an off roader, you depend on your gear and your vehicle for your very survival. You need the toughest, meanest parts you can get, and that's why Morris 4x4 Center offers such a wide selection. And why we now welcome the OR-Fab Stinger bumpers lineup for our Customers. But what are some of the benefits? How about:
- They're made in the U.S.A.
- Precision LASER cut
- 3/16" thick steel plate construction
- CNC Press Brake Formed
- Bolts directly into factory location
- Stainless steel hardware
- 1/2" thick steel mounting brackets
- Hand Welded and Ground for quality
- Stubby design maximizes tire clearance and approach angles
- Heavy Duty reinforced D-ring mounts and shackles included
- Tapered design easily slides off large rocks and ledges
- Available in Textured Wrinkle Black or Gloss Black powder coat finish
- Recessed Winch mount with 1/4" winch mounting plate included
- heavy-duty front stinger hoop that's set at a 44-degree angle made from
- .120 wall steel tubing
Wow, you'd think their making some kind of tank part for the military. Of course, if you're doing serious off-roading, you probably drive your Jeep like a tank anyway. However you drive, it looks like OR-Fab has you covered with their new Stinger bumpers. Don't forget about all of the OR-FABs products. They make all kind of different bumpers, such as Stubby Bumpers, Rock Slider Bumpers, Full Width Bumpers, Center Mount Winch Bumpers, Heavy Duty Bumpers, and of course, Rear Bumpers.
They also makes some great Tube Doors. The ones with the Gecko Lizard on them are exceptionally cool. They're powder coated, made of steel, and mount to the factory hinges. (no drilling!). As with any Tube Door, they offer protection, but also better visibility while trailing. The OR-FAB Rock Sliders
and Side Bars are some popular products as well. Made of quality steel materials, and available in several finishes, these Sliders and bars will protect the bottom edge of your Jeep from boulders, and large objects that might want to do damage to your Jeep.
OR-FAB makes some nice products for the back of your Jeep, primarily for the tailgate. Hookup with their Tail Gate License Relocation Plate, or their Vent Plate
. Of course, with the cool Gecko Lizar
d pattern laser cut into them, how can you resist? Don't forget the great OR-FAB rear Tire Carriers
. Including swing-away models, styles with fuel can carriers
, and they even offer Third Brake Light relocation kits. And just to round out the total package for your Jeep, OR-FAB makes some steel Quarter Armor to keep the sides of your Jeep safe from destruction on the trails. Heck, they even look good too ! Sounds like it's time to ramp up your Jeep options, and get some OR-FAB rockstar parts to make your Jeep the tough beast you want. Of course, you can buy all these bad boy OR-FAB products right here, at your favorite place for Jeep parts, Morris 4x4 Center.