- Maximum Tire Size: 37"
- Wheel Backspacing: 5"
- Does NOT fit dually models
- Does NOT fit Power Wagon models
- Does NOT fit models with rear air suspension
- Requires minor drilling and cutting
- Models equipped with factory rear overload springs will need to remove the overload spring
- On vehicles equipped with a two-piece driveshaft and carrier bearing as on the Mega Cab, there is the potential for takeoff vibration, depending on the severity, this can be corrected with shimming down the carrier bearing
Product Info
Important Notes
Description
The Rough Country 5" Suspension Lift Kit increases ground clearance while retaining many of the factory specifications. This results in an aggressive stance for your truck while maintaining the lush ride-quality from the factory. The key to preserving ride quality is keeping the geometry of all suspension components as close to factory angles as possible. This easy-to-install kit takes about 4-6 to complete and all of its components are backed by Rough Country's Lifetime Replacement Warranty.
Product Details
- Increased ground clearance
- Maintains factory progressive rate coil springs
- Track bar bracket keeps the front axle properly centered
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Includes application valved N2.0 series shock absorbers
- Takes around 4-6 hours to complete installation
- Backed by Rough Country's Lifetime Replacement Warranty
Parts Included
- (2) Front Premium N2.0 Series Shock Absorbers
- (2) Rear Premium N2.0 Series Shock Absorbers
- (2) Front Coil Spring Spacers
- (2) Front Radius Arms
- (2) Front Sway Bar Brackets
- (2) Rear 4" Fabricated Lift Blocks
- (4) Rear U-Bolts
- (1) Front Pitman Arm
- (1) Front Track Bar Bracket
- Hardware
Additional Info
| SKU | RC-369.20 |
|---|---|
| Brand | Rough Country |
| Manufacturer Part Number | 369.20 |
| SKU Aliases | 369.20 |
| Part Type | Suspension Lift Kit |
| Lift Height Range | 4-5 in., 5+ in. |
| Lift Kit Height Range | 4-5 in., 5+ in. |
