- This adapter plate kit works exclusively with the original Jeep T18 or T98 adapter housing and this adapter housing is approximately 5" in length
- This adapter plate kit only fits T18 or T98 transmission with a input shaft stick of 13"-14"
- With Adapter Plates, a new front bearing retainer is utilized to obtain proper bellhousing alignment. Chevy adapter plates a small index of 4.686" is used. If your bellhousing utilizes the larger 5.125" index diameter, you will also require an Advance Adapters Bellhousing Index Ring AA-712516.
- Sold as a kit
Required Parts by Manufacturer:
- Advance Adapters Bellhousing index ring AA-716078 is required
- Adapts Chevy V8 to Jeep T18 or T98 Transmission
This adapter plate assembly is used to adapt a GM Engine to the Jeep T18 or T98 4-speed manual transmission. The adapter plate is 1.812" in length and is manufactured from 356-T6 heat treated aluminum alloy. Included in the adapter plate kit you will receive an adapter plate, pilot bushing, gasket, seal, fastening hardware, and adapter instructions.
- Chevy/GM Small Block V8
- Chevy/GM 4.3L V6
- Buick 225 and 231 V6
- Adapter Plate
- Pilot Bushing
- Fastening Hardware
- Adapter Instructions