Artec Industries Dana 30/44 Heavy Duty Lower Control Arm Brackets, Normal Hole - Pair by Artec Industries

Important Notes:

• IF USING FACTORY CONTROL ARMS, YOU MAY NEED TO GRIND OFF A SMALL AMOUNT OF THE METAL BELOW THE BUSHING TO CLEAR THE SKID PLATE ON THE BRACKET. This bracket requires welding to the axle and removal of the factory bracket. Welding should be done by a competent welder and Artec Industries is not liable for incorrect installation or improper welding. "Horseshoe" pieces also require welding to the main bracket and the main bracket is laser etched to show where to weld.
• For the Horseshoe/Slotted version of this Bracket please see the AI-TJ3011

Description:

Product Details:

• 2.625" mounting width fits common sized Cartridge Joints (Johnny, Flex, Ballistic, etc) and factory control arm bushings.
• Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.
• Bracket wraps around axle tube more than factory for additional weld surface area,which significantly reduces the chance the bracket can rip off.
• Made from 1/4" thick boxed steel plate for strength and impact resistance.
• Grease fitting access on top to allow easy maintenance of your most abused joint.

Parts Included:

• (2) Lower Control Arm Brackets