- Sold as a kit
- Both the upper and lower mounts are included
- Auto Rust Rear Trailing Arm Mounts Frame Repair Kit - Right Side, ART-124R
- Welding IS required
- 1997-2003 Jeep Wrangler TJ
Replace the old, rusted out trailing arm mounts on your Jeep with the Auto Rust Rear Trailing Arm Mounts Frame Repair Kit for the left side. These rusted out trailing arms result in very unsafe conditions and may result in failed safety inspections if you live in a state that does inspections. The pre-fabricated replacement parts rebuild the rusted sections of your Jeep with no additional metal fabrication required.
Want to know whether your trailing arm mounts are rusted? Both the upper and lower trailing arm mounts are located in the area in front of the rear tire. In order to reach the fastening hardware for the upper trailing arm, the factory put an access hole in the frame. Because of the access hole, an area for large quantities of dirt, mud, road salt, and moisture was introduced and allows the debris to enter the frame. Because no coinciding drain holes were installed, all of the debris collects and begins to rust from the inside out. Because the upper trailing arm mount is located on the inside of the frame rail, its very difficult to see the corrosive process until its too late. Fortunately, Auto Rust has added a large drain hole to prevent this problem from repeating in the future.
The Auto Rust Rear Trailing Arm Mounts Frame Repair Kit includes both the upper and lower trailing arm mounts as well as upper control arm fastener hardware to make for an easier installation. Some welding is required to install these parts.
- CNC cut, bent and precision welded
- Improves safety
- Heavy gauge steel
- (1) Auto Rust Rear Upper Trailing Arm Mount
- (1) Auto Rust Rear Lower Trailing Arm Mount
- (1) Auto Rust Rear Upper Control Arm Fastener Hardware
1997, 1998, 1999, 2000, 2001, 2002 and 2003
|Brand||Auto Rust Technicians|