K&N Filters Red Intake Manifolds & Components
There are no products matching the selection.
Please Verify Your Vehicle.
If you’re looking for optimal performance from your car, there are a lot of things you can check. Properly inflated tires and quality fuel are two big factors for getting the most out of your vehicle, but airflow is central to your engine’s performance. Poor airflow will change your fuel economy, cause rough idling, or lead to stalling. Purchasing a new air intake system isn’t always necessary. You could benefit from installing a new K&N air filter.
What to Know About Air Intake Systems
The air intake system is what supplies your engine with continuous airflow to provide power and support better gas mileage. The entire system is made up of several components working together to bring air in from outside the vehicle, mix it with gas and send it through the engine cylinders to create physical energy. The air filter is the first main part of the system. Its job is to keep dirt or other particles out of the air coming into the engine for a clean burn.
The air filter prevents contaminants from getting into the intake systems and clogging up the different parts. It also allows pure oxygen to combine with the gas for a more efficient combustion reaction. This results in better power and engine performance.
Why You Should Consider K&N Filters
When it comes to airflow, more air to your engine equals more power. A K&N filter is much larger than a standard OEM air filter, and this oversized replacement will bring more air into the engine. You will notice an increase in acceleration and added horsepower by upgrading to a K&N filter. K&N uses shorter, fatter tubing to give the air a shorter route to the engine and uses a cotton conical filter specially fitted into a sealed box.
How To Install
Turn off the ignition before you replace your filter. Unlatch the housing for the air filter and remove the old filter. You may have to remove the coupling hose to get into the air cleaner box. Install the K&N air filter to the filter adapter and hold it secure using a hose clamp. Replace the housing and coupling hose.
A clean air filter will have immediate results on your engine’s performance. Shop for K&N filters and parts at Morris 4x4 to give your vehicle a boost.
Intake Manifolds & Components -K&N Filters
Jeep Intake Manifolds & Components
Upgrading the parts under your Jeep’s hood? Don’t forget about your Jeep intake manifold. We have a full selection of components for your intake manifold, from gaskets to cover brackets to seals. As always, our intake manifolds are from Omix, Mopar, Crown, and other leading brands. Each of our products meets our strict standards and is good enough for our team to use on our vehicles, so you should have confidence in their quality and longevity. To further that confidence, take a look at the reviews and ratings from past customers, which you can find on many of our intake manifolds and other parts. When you upgrade the Jeep components that sit under your hood, don’t forget about your intake manifold components and the Jeep intake manifold itself.
At the very least, you want to give your intake manifold an inspection to confirm it is in good shape. Then you can decide if you need to replace any components or even the entire manifold. Of course, you don’t need a reason to replace this or any part in your Jeep. If you want a Jeep Wrangler intake manifold upgrade, that is a good enough reason as well. To make your repairs and modifications easier, we have a full selection of components for your Jeep Cherokee intake manifold as well as the actual manifold. You can find intake manifold cover brackets, plenums, seals, gaskets, and swirl motors. We also have intake and exhaust gasket sets if you prefer kits that save you effort and a bit of money. Speaking of saving money, this is not hard to do when you shop at Morris 4x4 Center. You don’t even have to shop around to save, as our lowest price guarantee and price matching policy take care of that for you. To make it even easier to stick to your budget, you can filter our inventory based on price or whether a part is on sale.
