- JT Gladiator2018 Powertrain is installed at 9.25 Degree. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This model comes with CV and is suitable for lifts above 3 1/2".
- The purchaser shall be responsible to determine all design and/or specification parameters and the suitability of any particular product for its intended use.
Product Info
Important Notes
Description
1350 Heavy Duty rear driveshaft for 4 door Jeep JT Gladiator models with an automatic transmission. Replacement Driveline. This System is stronger than O.E. type applications recommended for stock to 6 1/2" lift.
J.E. Reel Drivelines are designed to work with 2 1/2" and 4 1/2" lifts from most lift manufacturers. Lifts higher than 4 1/2" or long arm lifts must be measured for driveline length. It is best to measure all drivelines if possible.
Product Details
- Collapsed Length 35.75"
- Ride Height 28.5"
- Extended Length 38.75"
- U Joint Style 1350 W/O ZERK
- Tube size 3.00X .083"
- Pinion/Yoke 3-4-3528R
- T/C Yoke 3-1-32R
Parts Included
- (1) 1350 Heavy Duty Rear Driveshaft
- Pinion Yoke
- Transfer Case Yoke
- Retaining Hardware
- Fastners
- Center Support Bearing Bracket
Additional Info
| SKU | BFGD-3519JTR-4RCV |
|---|---|
| Manufacturer Part Number | 3519JTR-4RCV |
| Variant ID | 8316987 |
| Brand | JE Reel Driveline |
| Part Type | Drive Shaft |
| SKU Aliases | 3519JTR-4RCV |
What It Fits
| Years | Make | Model |
|---|---|---|
| 2020-2023 | Jeep | Gladiator JT |
