Important Notes:
- Also fits right-hand drive vehicles
- Designed for vehicles with an ideal lift range of 2"-4.5", but can be used with up to 6" of suspension lift
- Can be used in conjunction with JKS or other aftermarket control arms that can be set to factory length
- Do NOT combine with any other drop/relocation brackets
Required Parts by Manufacturer:
- 2" of front bump stop extension is required for adequate clearance at full suspension compression. This issue can be alleviated with the JKS 2" X 3" Aluminum Bumpstop Spacer, JKS-11200.
Description:
These JKS Front Control Arm Correction Brackets are designed to re-position the front control arm mounting points to improve the operating angle for a smoother ride. These control arm correction brackets are built from heavy duty 7GA steel and fully welded for superior strength over bolt-together 2-piece style brackets. The brackets feature two upper arm mounting holes to allow the caster to be corrected between 2"-4.5" of lift.
Product Details:
- Corrects caster for 2"-4.5" of lift
- Improves ride quality and handling characteristics
- Improves the front driveshaft CV joint operating angles through full wheel travel
- Reduced control arm angles allow for a more natural feel going over bumps in the road
- Constructed of heavy duty 7GA steel
- Black powdercoat finish
- Bolt-on installation
Parts Included:
- (2) JKS Front Control Arm Correction Brackets for 2"- 4.5" Lift
- Hardware
