Rubicon’s Tri-Link suspension system features many of the components that make their trail proven Extreme-Duty long arm systems so popular. The new Tri-Link system will allow you to eliminate unwanted rear lateral Axle movement by removing the rear track bar; the removal of the rear track bar also alleviates any problems with linkage bind while at extremes in suspension movement. The Rubicon Express Tri-link provides perfect balance of off-road performance while maintaining safe, predictable on-road handling. This system features the RE3795 HDSF1 pivot ball assembly that provides 32 degrees of misalignment. Available for 4.5” and 5.5” heights as a bolt on application for factory Dana 35 and 44 Axles. Please specify Jeep year when ordering.
*Exhaust Modification Required
Installing a SYE and CV driveshaft is required when using a tri-link long arm system.
This system includes:
RE1142 – GEN II DISCONNECT
RE1156 or
RE1155 – REAR SWAY BAR END LINKS
RE13XX – FRONT COIL SPRINGS INCH
RE13XX – REAR COIL SPRINGS INCH
RE138X – FRONT BUMPSTOPS
RE1385 – 2.5 INCH REAR BUMPSTOPS
RE1395 – 1.5 INCH EXTENDED REAR BUMPSTOPS
RE1517 – BRAKE LINES BRAIDED STEEL REAR
RE1550 – BRAKE LINES BRAIDED STEEL FRONT
RE1610 – TRACK BAR TJ FRONT EXTREME-DUTY
RE1611 – TRACK BAR BRACKET TJ FRONT EXTREME-DUTY
RE2035 – TJ REAR WELD ON SHOCK MOUNTS
RE2500 – PITMAN ARM
RE4000 – EXTREME-DUTY CONTRL ARM LOWER LEFT
RE4010 – EXTREME-DUTY CONTRL ARM LOWER RIGHT
RE4020 – EXTREME-DUTY CONTRL ARM UPPER FRONT
RE4030 – EXTREME-DUTY CONTRL ARM LOWER REAR
RE4045 – EXTREME-DUTY CONTROL ARM UPPER REAR TRI LINK
RE4100 or
RE4200 – 3 PIECE CROSSMEMBER
RE4400 or
RE4405 – TRILINK TRUSS KIT
