Ignition System
Browse allProduct Details
MSD Performance Blaster Ignition Coil
1972-1977 Jeep CJ w/ Point Ignition System
The Blaster 2 Coils are supplied with a 0.8 ohm ballast resistor and a terminal and boot to fit most applications. The ballast resistor must be used with stock Points Ignition and Mallory Unilite applications.
1972-1977 Jeep CJ w/ Point Ignition System
The Blaster 2 Coils are supplied with a 0.8 ohm ballast resistor and a terminal and boot to fit most applications. The ballast resistor must be used with stock Points Ignition and Mallory Unilite applications.
- Features:
- Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
- Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
- 100:1 turns ratio and lower primary resistance produce high voltage output
- MSD Red metal canister is filled with a premium grade oil for cooling
- CARB E.O. Approved
- Specifications:
- Turns ratio:100:1
- Primary resistance:.7 OHMs
- Secondary resistance:4.5K OHMs
- Inductance:8 mH
- Maximum voltage:45,000 Volts
- Peak current:140 mA
- Spark duration:350 uS
- Weight:N/A
Vehicle Fitment
| Years | Make | Model |
|---|---|---|
| 1972-1977 | Jeep | CJ5 |
| 1976-1977 | Jeep | CJ7 |
| 1972-1975 | Jeep | CJ6 |
Additional Information
| SKU | MSD8203 |
|---|---|
| Brand | MSD Ignition |
| SKU Aliases | 8203 |
