Summertime Savings!
Up to $60 Off (click here for more)
Free Shipping Over $99*
Summertime Savings!
Up to $60 Off (click here for more)
    Please select your vehicle first
Select your vehicle

Poison Spyder Trail Cage Kit (8-Piece Set)

Part no: PS-1418010

THIS ITEM IS OUT OF STOCK

We're sorry! This product is out of stock. Need help finding a similar product?
Give us a call!! 1-877-553-5337 or Chat with one of our Jeep Experts.

$509.99 +$49.99 Surcharge (oversized)
Make sure it fits!

This product fits only specific vehicles.

Select Your Vehicle

Product Details

  • Fits Wrangler TJ and Wrangler TJL.
  • Designed for Jeep owners who already have the factory roll bar.
  • 8-Piece Set

Product Info

Important Notes

  • A Torx T-50 Tamper-Proof Driver Bit may be required to remove and replace/reinstall the OE windshield spreader bars. These may be hard to find at your local hardware store, so inquire within for your convenience.
  • Will require welding to install

Description

The Poison Spyder Trail Cage is designed for those Jeep YJ, TJ and LJ owners who already have the factory roll bar, and would like to add on to it to form a full roll cage rather than installing a complete new cage. The Trail Cage kit is an eight piece set. It comes with two Lower A-Pillars (dash to floor supports) and two tubular Upper A-pillars that are to be welded to the factory windshield bars. Also included are a dash bar, upper windshield bar, and two center spreaders that can be located in several positions.

The Poison Spyder Trail Cage kit comes disassembled and requires welding to install. The Lower A-Pillar is designed to provide a strong foundation for the forward section of the cage while not intruding into the dash or compromising legroom. The Trail Cage is secured at the windshield, at the front gusseted A-Pillar, at factory mounts on the door jamb and to the floor through the forward drain hole. This provides solid strength from the top of the windshield to the floor. The Lower A-Pillars and gussets are CNC laser cut and precision brake-formed for quality and fit. Tubular kit components are constructed from 1.75" .120 wall DOM structural tubing. All tubular components are CNC-bent and laser-notched for a precise fit, and laser-marked with reference numbers for easy identification and installation.

The Heavy Duty Header Bar Kit PS-14-18-030 is sold separately but is a highly recommended addition to the Trail Cage installation. The Trail Cage can be installed with the stock header bars, but those are little more than thin-wall tubing intended to brace the windshield, providing little in the way of cage protection. Our Heavy Duty Header Bar Kit replaces them with precision-manufactured, high strength components that work withh your stock roll bar and Poison Spyder Trail Cage Kit to provide the strength and safety of a real deal, heavy duty cage. The Heavy Duty Header Bars are made from high strength 1-3/4" X .120 wall DOM structural tubing, laser notched and expertly welded to CNC laser cut 3/16" mount plates. For comparison, the stock header bars are made of .095 wall welded seam tubing, withh thin gauge stamped metal mounting flanges. The DOM tubing used in the Poison Spyder kit has a yield strength of 70,000 psi, with a tensile strength of 44,668 lbs. Compare that to the welded seam tubing of the stock header bars, at 40,0000 psi yield strength and only 19,757 lbs. tensile strength. The Heavy Duty Header Bar Kit may also be installed by itself without the Trail Cage, or with other manufacturer's add-on cage kits.

Product Details

  • Fits Wrangler TJ and Wrangler TJL.
  • Designed for Jeep owners who already have the factory roll bar.
  • 8-Piece Set
For California residents: Proposition 65 Warning

Parts Included

  • (2) Lower A-Pillars (dash to floor supports)
  • (2) Tubular Upper A-pillars
  • (1) Dash Bar
  • (1) Upper Windshield Bar
  • (2) Center Spreaders

Additional Info

SKUPS-1418010
Manufacturer Part Number14-18-010
Variant ID4461696
BrandPoison Spyder
Part TypeRoll Cage
SKU Aliases14-18-010
FinishBare

What It Fits

YearsMakeModel
1997-2006JeepWrangler TJ
YearsMakeModel
2004-2006JeepWrangler TJ Unlimited

Installation

Compare Similar Products

Compare Similar Products
  Current Product Similar Product Similar Product Similar Product
  Poison Spyder Fully Welded Roll Cage with Grab Handles
Smittybilt SRC 7-Piece Cage Kit - Satin Black Powder Coat
Smittybilt SRC Roll Cage Kit, 6 Piece - Gloss Black
Smittybilt SRC 6-Piece Cage Kit - Satin Black Powder Coat
Brand
Poison Spyder
Smittybilt
Smittybilt
Smittybilt
Name
Poison Spyder Fully Welded Roll Cage with Grab Handles
Smittybilt SRC 7-Piece Cage Kit - Satin Black Powder Coat
Smittybilt SRC Roll Cage Kit, 6 Piece - Gloss Black
Smittybilt SRC 6-Piece Cage Kit - Satin Black Powder Coat
Price
$2,188.99 +$199.99 Surcharge (oversized)
$790.99 +$129.99 Surcharge (oversized)
$717.99 +$129.99 Surcharge (oversized)
$709.99 +$129.99 Surcharge (oversized)
Rating
Part Type
Roll Cage
Roll Cage
Roll Cage
Roll Cage
Color
N/A
N/A
N/A
N/A
Material
N/A
N/A
N/A
N/A
SKU Aliases
PSC14-19-010-WG, 14-19-010-WG, 14-19-010-WG
B003EOTTEW, J17530, S/B76901, SMI76901, 76901, 76901
76902
B008CLMSL8, J17544, S/B76904, SMI76904, 76904, 76904
Questions 
Reviews 
Let's Chat