10% Off Over $75 + Free Shipping*
Use Code: PRES19
Presidents Day Sale
  • Make sure it fits

    Please select your vehicle to ensure that this product fits.

Select your vehicle

RIPP Intercooled Supercharger for 3.6L Pentastar V6 Engines, RHD - Manual Transmission by Ripp Superchargers

Part no: RP1214JK36SDS-MRHD

$6,140.96 + free Shipping
Price match guarantee

Please Verify Fitment

This product fits only specific vehicles. Select your vehicle to ensure it fits.

Product Details

Important Notes:

  • RHD - Right Hand Drive vehicles ONLY
  • Upon Purchasing, you will be required to supply us with your VIN NUMBER and ODOMETER READING, this will be registered to a new custom Engine Computer and Diablo Tuner.
  • Proper ECU calibrations are provided by RIPP via a Pre-programmed Diablosport tuner.
  • All RIPP WHP levels are measured at the rear wheel, not at the crank. Be careful when comparing HP to WHP. WHP levels vary depending on tire and gear combination as rotational mass comes into play, this affects both Naturally Aspirated (NA) and Forced Induction (FI) total output.
  • The factory transmission cannot be tuned directly. Please make sure you have the proper gear ratio for your vehicle's wheel/tire set-up to maximize it's potential


  • 2012-2014 Jeep Wrangler JK with 3.6L V6 Pentastar Engine, RHD and Manual Transmission
  • 2012-2014 Jeep Wrangler Unlimited JK with 3.6L V6 Pentastar Engine, RHD and Manual Transmission


RIPP offers this Intercooled Supercharger Kit for your 2015 Jeep Wrangler JK equipped with the 3.6l Pentastar V6 engine. RIPP Superchargers is the number one selling supercharger in the 2007-2016 Jeep Wrangler communities. These kits are considered the easiest to install, most powerful and most reliable.

This new ECM will now have the capability to be manipulated. Simply unclip the factory engine computer, unscrew 4 screws and replace it. Installation will still be a 6-8 hour installation. Power numbers will yield 325WHP and 300ft/lbs to the wheels on a 37" tire. Kits will come with everything necessary to install and have a turn key daily driver! Your factory ECM can simply be put away in storage. If the vehicle is ever put back to stock, the factory ECM can be plugged back in, without a trace of modification!

This system bolts on in 6 to 8 hours and is considered the most complete and easy to install system on the market.

Preliminary tests show RIPP's Jeep JK producing just 189 rear wheel HP (WHP) stock. With this proto-type supercharger installed you are able to squeeze much more HP and Trq in a completely check engine light free environment with all emissions and knock control features on, making it extremely safe for any form of motor-sport.

Product Details:

  • Vortech V3 Self-Contained Centrifugal Supercharger
  • Air-to-air front mounted intercooler
  • Larger plug and play primary injectors
  • Proprietary plug-&-play map sensor

Parts Included:

  • (1) RIPP Intercooled Supercharger for 3.6L Pentastar V6 Engines, RHD - Manual Transmission

Years Covered:

2012, 2013 and 2014

For California residents: Proposition 65 Warning

Vehicle Fitment

2012-2014JeepWrangler JK Unlimited
2012-2014JeepWrangler JK

Additional Information

BrandRipp Superchargers
SKU Aliases1214JK36SDS-MRHD

Let's Chat