sPOD BantamX 8-Circuit Control System with HD Smart Panel for Jeep JK

The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

HD Control Panel Features:

• Encased in an aluminum billet machined housing, powder coated black, utilizing tactile switches encapsulated in silicone.


• Silicone Buttons with positive touch feedback.


• Panel is designed to withstand the harshest environments with all weather conditions considered.


• Compact in size: 2-7/8"W x 4-7/8"L x 1/2" Thick (smaller than an iPhone).


• Universal back with two pressed-in 1/4"-20 studs x 5/8" long for flat mounting.


• Standard universal articulating mount for a multitude of mounting options.


• One standard RJ45 jack on back for communication cable between HD panel and the BantamX. (HD comes with a 10 foot CAT-6 Ethernet cable)


• HD can be located up to 25 feet from the Source using standard CAT-6 Ethernet cable.


• Built in Bluetooth LE allows you to program and control our system with iPhones, iPad, iPad Mini using the free sPOD app.


• Three levels of secured or open Bluetooth pairing/connectivity.


• Each switch programmable for dimming, flash, momentary, strobe, and switch linking (program any switch to be a master to control other switches).


• All 8 switches are backlit.


• Adjustable timer to turn backlight off and a simple touch on any switch to reactivate.


• Quickly turn backlight off by holding 2 designated buttons.


• RGB backlight color and intensity can be changed to any color to match vehicle interior dash lighting.


• Panel lock-out feature for safety and security.


• Legends can be applied (comes standard with one sheet of 72 legends).


• Each switch has 3 status lights: Red (left) = On, White (center) = Flash/Strobe active, Blue (right) = Active visual feedback when button is pushed.


• Status lights can be dimmed.


• Additional HD smart controller can be added for different locations.

Features Available Through sPOD Mobile App (free):

• Each switch can be programmed for:


• Dimming


• Strobe


• Flash


• Momentary


• Switch Linking


• On Road and Off Road mode of operation

The following features are only available through the purchase of the sPOD Pro-Series App:

• Circuit timers


• Switch lockout


• Initial startup current for each circuit is raised to 65amps for 5 seconds


• Program any circuit to be always on while still maintaining fault protection


• Option to disable deep sleep mode


• Selectable auto restart after circuit shuts down from over current/short


• Programmable Current Limiting (in 2amp increments up to 30amps)


• Selectable auto restart for current limiting shut down


• Selectable Latch or Momentary actions for inputs


• Programmable ignition control for all 8 circuits


• Variable strobe function to create custom flash/strobe patterns

External Controller Options (not included with system and can only be used in conjunction with an sPOD controller):

• Third party switches


• Computers


• Arduino


• Raspberry Pi


• Alpine Audio systems KAC-001 head unit controller


• Sensors, thermostats, pressure switches, fan controllers and more