$30 Off Over $300
Code: OCT30
Free Shipping Over $75*
  • Make sure it fits

    Please select your vehicle to ensure that this product fits.

Select your vehicle

Synergy Front Steering Correction Kit by Synergy

Part no: SSM-8011

$360.00 + free Shipping
Price match guarantee

Please Verify Fitment

This product fits only specific vehicles. Select your vehicle to ensure it fits.

Product Details

Important Notes:

  • Use of the front track bar bracket requires the use of a minimum 3.0" bump stop spacer
  • Requires a maximum 4-3/4" backspace wheel or wheel spacer with factory wheel setup. 4-1/2" back spacing is recommended
  • Kit requires 16" or larger wheel diameter

Required Parts by Manufacturer:

  • Use of the front track bar bracket requires the use of a minimum 3.0" bump stop spacer.
  • High Steer setup requires the Drag Link to be relocated to the top of the steering knuckle.
  • Kit requires 16" or larger wheel diameter
  • Note: 8055 Track Bar Bracket is not recommended for hydro assist applications. For hydro assist, use 8012-13 or 8009-01 weld-on track bar brackets which include hydro assist tabs.
  • Note: If using a front adjustable track bar other than Synergy, make sure track bar can be collapsed far enough to center axle. Track bar will need to be close to stock length once relocated.
  • Installation of Drag Link requires the taper on the passenger knuckle be flipped with the (TRE) Tie Rod End Flip Adapter, SSM-8001-02. An alternative to this is to ream the knuckle using a 1-1/2" Tapered Reamer

Description:

The Synergy JK Front Steering Correction Kit is designed to correct wandering steering that is sometimes experienced on lifted Jeeps.

Parts Included:

Product Details:

  • Designed to correct the wandering steering feeling that is sometimes experienced when lifting a Jeep JK
  • The drag link is made from 1.50 x .250 wall DOM tubing
  • Exclusive double adjuster sleeve and pinch bolt setup for adjustment while the drag link is installed
  • The track bar bracket raises the vehicles suspension roll center by 3.0"
  • Special bolt-on design strengthens the factory axle mount that is prone to failure
  • Raising the roll center reduces vehicle body roll and dramatically improves overall handling
  • The bracket relocates the factory or aftermarket steering stabilizer up and out of harms way
  • Requires a maximum 4-3/4" backspace wheel or wheel spacer with factory wheel setup. 4-1/2" back spacing is recommended
  • Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
  • 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
  • Suspension components feature an abrasive-resistant powder coat finish for maximum durability and corrosion resistance

Years Covered:

2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018

For California residents: Proposition 65 Warning

Vehicle Fitment

YearsMakeModel
2007-2018JeepWrangler JK Unlimited
2007-2018JeepWrangler JK

Additional Information

SKUSSM-8011
BrandSynergy
SKU Aliases SSM-8000-01, SSM-8055

bubble-icon
Let's Chat