Summertime Savings!
Up to $60 Off (click here for more)
Free Shipping Over $99*
Summertime Savings!
Up to $60 Off (click here for more)
    Please select your vehicle first
Select your vehicle

Synergy Manufacturing 2"-3" Front Lift Coil Springs - Pair

Part no: SSM-8863-20

$280.00
Out Of Stock
Make sure it fits!

This product fits only specific vehicles.

Select Your Vehicle

Product Details

  • Increased ride quality
  • Increased wheel travel/articulation/traction
  • No spring bowing
  • Lifetime warranty/guarantee against sagging and breakage
  • Multi-Rate coil springs allow for longer spring lengths and increased travel
  • Spring rates are only 5-10 percent stiffer than stock for superior ride quality
  • Coil spring block heights designed around common bump stop spacings to optimize wheel travel
  • Ground and closed lower spring ends to prevent bowing
  • Includes front lower coil spring isolators to match the ground and closed spring ends
  • Unique spring lengths for each corner of the vehicle so it will sit level side to side
  • Frequency balanced and tuned spring rates to maximize suspension performance on and off road
  • Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
Read more

Product Info

Important Notes

  • 2" lift height for JLU
  • 3" lift height for JL
  • Coil springs require proper bump stop spacing with Synergy SSM-8057-10 Bump Stop Spacers.
  • Lift heights are based off fully loaded Rubicon models. Other models will see more lift.
  • Coil springs retain the stock rake of the vehicle.
  • Up to .75 inch of front coil spring spacer can be added to level the vehicle using SSM-8017-075 front coil spring spacers.
  • Min bump stop spacing of 2" is the minimum amount of bump stop spacing required to prevent the springs from going into coil bind. Do not use less bump stop spacing.

Description

Synergy MFG Jeep JL Multi-Rate Front Lift Coil Springs. Synergy MFG has designed these springs from a clean sheet for the new Wrangler platform. All springs are multi-rate and have been designed to make a great platform even better. These springs are unique to the JL and not shared with the JK or other vehicles. Like OEM, Synergy coil springs are unique lengths to account for load differences on each corner of the vehicle. There are right and left specific springs front and rear to guarantee the vehicle will sit level. Springs are designed to be used with up to .75 inch of front spring spacer without requiring additional bump stop spacing. Multi-rate design has a softer initial rate which prevents the spring from coming loose in the coil tower, even with long travel shocks. The ride rate is slightly stiffer than the OEM springs to account for additional weight from bumpers, winches, skid plates and gear. Springs are proudly manufactured in the United States of the highest quality steel. Springs are designed to be able to set solid (fully collapse) without overstressing the material and are pre-set from the factory meaning the springs will never sag or set.

Product Details

  • Increased ride quality
  • Increased wheel travel/articulation/traction
  • No spring bowing
  • Lifetime warranty/guarantee against sagging and breakage
  • Multi-Rate coil springs allow for longer spring lengths and increased travel
  • Spring rates are only 5-10 percent stiffer than stock for superior ride quality
  • Coil spring block heights designed around common bump stop spacings to optimize wheel travel
  • Ground and closed lower spring ends to prevent bowing
  • Includes front lower coil spring isolators to match the ground and closed spring ends
  • Unique spring lengths for each corner of the vehicle so it will sit level side to side
  • Frequency balanced and tuned spring rates to maximize suspension performance on and off road
  • Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
For California residents: Proposition 65 Warning

Parts Included

  • (2) Synergy Manufacturing 2"-3" Front Lift Coil Springs
  • (2) Front Coil Spring Lower Isolators

Additional Info

SKUSSM-8863-20
Manufacturer Part Number8863-20
Variant ID7236756
BrandSynergy
Part TypeCoil Springs
SKU Aliases8863-20
ColorBlack
FinishPowder Coated
Lift Height Range2-3 in.
MaterialSteel
Enable Quick ShipYes

What It Fits

YearsMakeModel
2018-2023JeepWrangler JL
YearsMakeModel
2018-2023JeepWrangler JL Unlimited

Installation

Compare Similar Products

Compare Similar Products
  Current Product Similar Product Similar Product Similar Product Similar Product Similar Product
  Synergy Manufacturing 2"-3" Front Lift Coil Springs - Pair
Rock Krawler Triple Rate 3.5" Front Coil Springs
Rock Krawler Heavy Duty Linear Rate 5.5" Front Coil Springs
Rock Krawler Heavy Duty Triple Rate 3.5" Rear Coil Springs
Skyjacker 6" Front Softride Coil Springs
Skyjacker Softride Front Coil Springs, 8" Lift, Pair
Brand
Synergy
Rock Krawler
Rock Krawler
Rock Krawler
Skyjacker
Skyjacker
Name
Synergy Manufacturing 2"-3" Front Lift Coil Springs - Pair
Rock Krawler Triple Rate 3.5" Front Coil Springs
Rock Krawler Heavy Duty Linear Rate 5.5" Front Coil Springs
Rock Krawler Heavy Duty Triple Rate 3.5" Rear Coil Springs
Skyjacker 6" Front Softride Coil Springs
Skyjacker Softride Front Coil Springs, 8" Lift, Pair
Price
$280.00
$225.00
$225.00
$225.00
$232.96
$276.11
Rating
Part Type
Coil Springs
Coil Springs
Coil Springs
Coil Springs
Coil Springs
Coil Springs
Color
N/A
N/A
N/A
N/A
N/A
N/A
Material
N/A
N/A
N/A
N/A
N/A
N/A
SKU Aliases
8863-20
RK02001
RK02003
RK03101
76004.801, B000K0TCCW, S97JC60F, SKYJC60F, JC60F, JC60F
B000E3FF1W, S97JC80F, SKYJC80F, JC80F, JC80F
Questions 
Reviews 
Let's Chat