Summertime Savings!
Up to $60 Off (click here for more)
Free Shipping Over $99*
Summertime Savings!
Up to $60 Off (click here for more)
    Please select your vehicle first
Select your vehicle

Teraflex 4.5" Alpine RT4 Long Arm Suspension Lift Kit - No Shocks

Part no: TF-1534000

THIS ITEM IS OUT OF STOCK

We're sorry! This product is out of stock. Need help finding a similar product?
Give us a call!! 1-877-553-5337 or Chat with one of our Jeep Experts.

$5,996.99
Make sure it fits!

This product fits only specific vehicles.

Select Your Vehicle

Product Details

  • Sport/Sahara Fenders: 35” Tires
  • Rubicon Fenders: 35-37” Tires
  • Aftermarket High Fenders: 39”+ Tires
  • Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angles on 3-6” lift kits
  • Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength
  • On higher lifts, Alpine IR Long Control Arms & Brackets reduce bushing stress and shock load felt through the control arms
  • Delivers true Rogue Trail (RT) performance
  • Dependable performance w/ zero worries
  • Positive, responsive handling w/ reduced NVH
  • High-quality, maintenance-free IR Bushings allow unrestricted rotation during droop for less overall bind during articulation as well as improved ride quality
  • Full range of movement for off-road flex and articulation
  • Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
  • TeraFlex SpeedBump Front & Falcon Progressive Rear Bump Stops provide progressive compression during high-speed suspension movement
  • Install and drive simple bolt-on installation – no welding required
  • TeraFlex Lifetime Warranty
Read more

Product Info

Important Notes

  • Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED
  • Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires
  • Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) in order to fit 35” tires
  • Sport/Sahara Fenders require 3.5” front and 4” rear bump stop extensions and shims in order to fit 37” tires. Requires an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit TF-1959300 – NOT INCLUDED
  • Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) in order to fit 37” tires
  • Aftermarket High Fenders required to fit 39”+ tires. Bump stop extension and shim requirements will vary based on setup including wheel/tire combination, shock collapsed length, and fenders. Installer must check for clearances. We recommend an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit TF-1959300 – NOT INCLUDED
  • Requires cutting/removal of factory control arm bracketry to install Alpine Long Flexarm Brackets
  • Alignment required
  • Requires longer shocks (not included in base kit) – Falcon SP2 Mode Adjust Performance Shocks recommended

Description

The 4.5” Alpine RT4 Long Arm Suspension System is engineered to excel on the highway, off-road, through the desert, or rock crawling! If that sounds impossible, just remember it’s a TeraFlex suspension system built on decades of research and development resulting in the ultimate suspension with a lifetime warranty. Bolt-on Alpine IR Long Control Arms & Brackets, Alpine IR Front Track Bar, and front and rear track bar brackets allow full suspension adjustability, while the SpeedBumps smooth out the unexpected trail bumps. Adjustable Alpine IR Long Control Arms tune caster angle anti-squat geometry, and tire position. On higher lifts, Alpine IR Long Control Arms retain near factory orientation to reduce bushing stress during extreme droop as well as reduces shock load transferred through the control arms. The adjustable Alpine IR Front Track Bar works with the Front (3.5”+) and Rear Track Bar Brackets to improve steering response, optimize vehicle roll center, and reduce body roll for unsurpassed handling.

Product Details

  • Sport/Sahara Fenders: 35” Tires
  • Rubicon Fenders: 35-37” Tires
  • Aftermarket High Fenders: 39”+ Tires
  • Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angles on 3-6” lift kits
  • Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength
  • On higher lifts, Alpine IR Long Control Arms & Brackets reduce bushing stress and shock load felt through the control arms
  • Delivers true Rogue Trail (RT) performance
  • Dependable performance w/ zero worries
  • Positive, responsive handling w/ reduced NVH
  • High-quality, maintenance-free IR Bushings allow unrestricted rotation during droop for less overall bind during articulation as well as improved ride quality
  • Full range of movement for off-road flex and articulation
  • Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
  • TeraFlex SpeedBump Front & Falcon Progressive Rear Bump Stops provide progressive compression during high-speed suspension movement
  • Install and drive simple bolt-on installation – no welding required
  • TeraFlex Lifetime Warranty
For California residents: Proposition 65 Warning

Parts Included

  • 4.5” Lift Coil Springs
  • Alpine IR Long Control Arm & Bracket Kit
  • Alpine IR Front Track Bar
  • Front Track Bar Bracket
  • Rear Track Bar Bracket
  • SpeedBump & Progressive Bump Stop Kit
  • 2” Bump Stop Strike Pad Extension Kit
  • 0.5” Bump Stop Strike Pad Shim Kit
  • 10.75” Front Sway Bar Link Kit
  • 11.5” Rear Sway Bar Link Kit
  • Front Brake Line Anchor Kit
  • Hardware

Additional Info

SKUTF-1534000
Manufacturer Part Number1534000
Variant ID7258326
BrandTeraflex
Part TypeSuspension Lift Kit
SKU AliasesTF-1753420, TF-1317001, TF-1317002, TF-1958000, TF-4609100, TF-1402100, TF-1958350, 1534000
Lift Kit Height Range4-5 in.

What It Fits

YearsMakeModel
2018-2023JeepWrangler JL Unlimited
Questions 
Reviews 
Let's Chat