- Grease must be packed thoroughly and liberally to the entire CV assembly. Be generous and use all grease provided. Improperly packing the bearings with sufficient grease will result in bearing failure.
- For complete step-by-step procedure please watch the instructional video linked below.
- 2007-2017 Jeep Wrangler JK
- 2007-2017 Jeep Wrangler Unlimited JK
This Rzeppa High Angle Factory Replacement CV Kit from TeraFlex replaces a worn or damaged Rzeppa CV joint while retaining the factory driveline, avoiding an expensive upgrade. The high angle CV housing reduces boot failure associated with taller lift heights. This is especially important on JKs with 3 or more inches of lift.
- Replacement Rzeppa CV kit
- Includes low-friction CV grease
- Retains the factory driveline
- Length: 9"
- Width: 5"
- Height: 5"
- Weight: 5 lbs
- (1) CV Joint
- (1) CV Cap
- (1) CV Dust Boot and Housing Assembly
- (4) Half Moon - Two Bolt Flange
- (1) Boot Side Gasket
- (1) Cap Side Gasket
- (1) Grease Tube
- (1) Boot Clamp
- (1) Retaining Snap Ring
- (8) Bolt M8-1.25 x 50mm Socket Head
- (1) 6mm Allen Wrench
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and 2017
|2007-2018||Jeep||Wrangler JK Unlimited|
|SKU Aliases||1744014, TER1744014|