The Trigger 4 Plus Solid State Relay Switching System substantially saves installation time of your electronic accessories and eliminates the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as; an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses. The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remotes. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote. The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand."
- Product Details:
- 4 channel. 2 x 30 amp relays, 2 x 10 amp relays, All Solid State, 12-24 volt
- External antennas for greater range
- 2.4 Ghz with more robust security
- DIN Port Aux. In for control from any conventional switch
- Battery powered RF Remote with universal mount system
- Bluetooth control from phone/tablet app
- Manual buttons for on/off on top of case
- 12 volt input, 3 wires, ground, switched positive, battery positive
- 12 volt out with waterproof connectors
- Fuse’s built in, waterproof cover (30 amp - 1 and 2, 10 amp - 3 and 4)
- LED’s to indicate relay on and if fuse is blown
- Waterproof case design, withstands temps to 250 deg. F.
- Waterproof connectors included on both the control box and the harnesses
- Parts Included:
- (4) Wiring Harnesses
- (1) Control Box
- (1) RF Remote
- Hardware
22.5" LED Light Bar
The PLX LED Bar throws a dense 120 watt, 10,800 lumen spot/flood combo beam. The waterproof housing is crafted from heavy gauge aluminum, with a sealed, shatterproof polycarbonate lens. The kit includes all hardware for side or pedestal mounting, a contained lead wire bundle with water resistant Deutch connector. Check with vehicle owners' manual and local city/state regulations to see if there are any restriction on the use of auxiliary lights.
Wiring Harness Relay Kit
Pilots PLX Wiring Harness makes installing our PLX LED Light Bars by simply plugging them into the harness. Each harness includes waterproof connectors, illuminated LED switch, fuse, and relay to safely install your PLX Lights.
- Product Details:
- Harness, Single Under 179W
- UPC: 757558-81033-8
- Dimension: 3.5"(H) x 4"(W) x 10.4"(L)
- Weight: 1 lbs
- Single connector for installing 1 Pilot PLX Light 179 watt and lower
- Waterproof connector
- Illuminated LED switch
- 40 Amp Relay
