- Pressure Switch w/Relay is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.
- Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Product Info
Important Notes
Description
VIAIR's Heavy Duty Onboard Air System is a pre-packaged compressed air solution that provides a faster 33% duty cycle 400C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires right out of the box.
Specifications:
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 33% @ 100 PSI
- Max. Working Pressure: 150 PSI
- 1/4" Quick Connect Coupler (F)
- Max. Amp Draw: 30-Amps
- Ingress Protection Rating: IP67
Product Details
- 2.5 Gallon VIAIR Air Tank
- 400C VIAIR Compressor w/Thermal Overload Protector
- 35ft. Coil Hose with Tire Chuck
- 1/4" Quick Connect Stud (F)
- 1/4" Quick Connect Coupler (F)
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 145 PSI off)
- Reducer: 1/8" (F) to 1/4" (M)
- 1/4" 175 PSI Safety Valve
- 1/4" Drain Cock
- (3) 1/4" Compression Fittings
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- 4" Strip of Continuous Grommet Material
- Accessory Airline
- Electrical Connections
Parts Included
- Viair Heavy Duty Onboard Air System
Additional Info
| SKU | BKTN-10005 |
|---|---|
| Manufacturer Part Number | 10005 |
| Variant ID | 2353172 |
| Brand | Viair |
| Part Type | Air Compressor Kit |
| SKU Aliases | 10005 |
