Steer Smarts YETI XD Draglink Top Mount (Drilled Stock Knuckle or High Steer Knuckles) by Steer Smarts

Important Notes:

• Draglink fits all left hand drive JK Wrangler models 2007 to 2018 including Rubicon and Unlimited. Note: A minimum of 17”wheels is recommended. 16" wheels with a maximum 4.5 back spacing might fit but not guaranteed.Note: A minimum of 17”wheels is recommended. 16" wheels with a maximum 4.5 back spacing might fit but not guaranteed.

Description:

Product Details:

• Easy bolt-on installation
• 30mm 1 1/2 Ton ball joints designed specifically for the JK.
• Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
• DragLink Ends have a powder coat over E-coat for a long lasting appearance under harsh conditions
• High quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition
• Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
• Unique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.
• Draglink adjuster is manufactured from large diameter ¼ inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.

Parts Included:

• (1) Steer Smarts YETI XD Draglink Top Mount (Drilled Stock Knuckle or High Steer Knuckles)