Zone Offroad 4" Suspension Lift Kit with Nitro Shocks by Zone Offroad Products

Tire/Wheel Fitment:

• Maximum Tire Size: 31"
• Wheel Size: 15" x 8"
• Wheel Backspacing: 3.5"-4"

Tire/Wheel Fitment:

• Maximum Tire Size: 32"
• Wheel Size: 15" x 8"
• Wheel Backspacing: 4.5"

Important Notes:

• Vehicles equipped with a V8 engine may not achieve stated lift height. Front 3/4" coil spacer is a common addition to this lift kit for the V8 models to accommodate the additional weight of the larger engine.
• Measure front driveshaft prior to installation. For driveshafts over 24-1/2", no modification should be necessary. For driveshafts 20" to 24", you may need to change to a spicer type joint if vibration occurs.

Required Parts by Manufacturer:

• Vehicles equipped with a CV style front driveshaft mount at the pinion require a new spicer type u-joint to eliminate vibration.
• If driveshaft is less than 20" then a spicer type joint is required and vibration may persist.

Fits:

• 1993-1998 Jeep Grand Cherokee ZJ 4WD

Description:

Product Details:

• Installation Time: 5-6 hours
• Improves ground clearance
• Provides off road performance and on road handling
• The rear track bar relocation system perfectly centers the axle under your ZJ
• Bump stop extensions protect your vehicle while still increasing wheel travel

Parts Included:

• (2) Front Nitro Shocks
• (2) Rear Nitro Shocks
• (2) Front Coil Springs
• (2) Rear Coil Springs
• (2) Front Sway Bar Links with Bushings
• (2) Sway Bar Link U-Brackets
• (2) Front Lower Control Arms
• (2) Rear Lower Control Arms
• (2) Front Bump Stop Extensions
• (4) Rear Bump Stop Extensions
• (4) Transfer Case Drop Spacers
• (1) Rear Track Bar Bracket
• All Necessary Hardware

Years Covered:

1993, 1994, 1995, 1996, 1997 and 1998