K&N Filters Engine Timing Chain Jeep-Cherokee XJ Axle Shafts, Bearings & Seals
Filters
Currently Shopping by
There are no products matching the selection.
Please Verify Your Vehicle.
If you’re looking for optimal performance from your car, there are a lot of things you can check. Properly inflated tires and quality fuel are two big factors for getting the most out of your vehicle, but airflow is central to your engine’s performance. Poor airflow will change your fuel economy, cause rough idling, or lead to stalling. Purchasing a new air intake system isn’t always necessary. You could benefit from installing a new K&N air filter.
What to Know About Air Intake Systems
The air intake system is what supplies your engine with continuous airflow to provide power and support better gas mileage. The entire system is made up of several components working together to bring air in from outside the vehicle, mix it with gas and send it through the engine cylinders to create physical energy. The air filter is the first main part of the system. Its job is to keep dirt or other particles out of the air coming into the engine for a clean burn.
The air filter prevents contaminants from getting into the intake systems and clogging up the different parts. It also allows pure oxygen to combine with the gas for a more efficient combustion reaction. This results in better power and engine performance.
Why You Should Consider K&N Filters
When it comes to airflow, more air to your engine equals more power. A K&N filter is much larger than a standard OEM air filter, and this oversized replacement will bring more air into the engine. You will notice an increase in acceleration and added horsepower by upgrading to a K&N filter. K&N uses shorter, fatter tubing to give the air a shorter route to the engine and uses a cotton conical filter specially fitted into a sealed box.
How To Install
Turn off the ignition before you replace your filter. Unlatch the housing for the air filter and remove the old filter. You may have to remove the coupling hose to get into the air cleaner box. Install the K&N air filter to the filter adapter and hold it secure using a hose clamp. Replace the housing and coupling hose.
A clean air filter will have immediate results on your engine’s performance. Shop for K&N filters and parts at Morris 4x4 to give your vehicle a boost.
Axle Shafts, Bearings & Seals -K&N Filters
Jeep Axle Shafts, Bearings & Seals
Given the types of adventures that you have in your Jeep, it makes sense to want to take care of upgrades and repairs yourself. After all, you want to trust that every bit of your Jeep is fully functional, down to the Jeep axle shafts. There is no better method of ensuring that than to do the modifications yourself. We have dozens of parts related to axle shafts and seals, such as axle shaft guides, lock rings, flange gaskets, C-clips, bushings, bearings, seals, and spacers. If you aren’t positive about which part you need for your plans, consult with our team over the phone or live chat. Working to upgrade your Jeep can be fun and time-consuming, especially if you decide to modify the interior components such as the Jeep axle shafts.
Morris 4x4 Center makes it easy to find the parts you need for your planned upgrades, so you can focus your efforts on enjoying the process instead of wasting time comparing parts. We have everything you need for your axle shaft bearing, as well as related parts. For the axle shaft alone, you will find spacers, snap rings, seal retainers, seals, seal pullers, seal install tools, seal retainers, retainer rings, oil slingers, O-rings, C-clips, flange gaskets, lock rings, guides, bearing spacers, bushings, bearing kits, bearings, and bearing retainers. We also have related parts in stock, such as axle nuts, axle conversion kits, axle dust shields, stub axles, vacuum axle disconnect lock washers, wheel bearings, wheel bearing lock washers, and more. Remember to make sure that the Jeep Wrangler axle seal, bearing, or shaft you choose is compatible with your SUV. To make it easier, we let you filter our inventory by axle type, spline count, gear ratio, position, and location. Each product description also gives you more information on compatibility, and our team can assist with this as well.
