Jeep Cherokee XJ Axles
Filters
Currently Shopping by
- Category
-
- Axle Housing & Components
- Axle Shafts, Bearings & Seals
- Locking Hubs
- Trusses & Gussets
- U-Joints
- Axle Hubs & Components
- CV Axles & Components
- Differential Breather
- Fluids & Oils
- King Pin & Components
- Knuckles, Spindles & Components
- Limit Straps
- Sensors
- Skid Plates
- Wheel Studs
- Axle Disconnect Components
- Axle Mounting
- Complete Axles
There are no products matching the selection.
Please Verify Your Vehicle.
If you’re looking for optimal performance from your car, there are a lot of things you can check. Properly inflated tires and quality fuel are two big factors for getting the most out of your vehicle, but airflow is central to your engine’s performance. Poor airflow will change your fuel economy, cause rough idling, or lead to stalling. Purchasing a new air intake system isn’t always necessary. You could benefit from installing a new K&N air filter.
What to Know About Air Intake Systems
The air intake system is what supplies your engine with continuous airflow to provide power and support better gas mileage. The entire system is made up of several components working together to bring air in from outside the vehicle, mix it with gas and send it through the engine cylinders to create physical energy. The air filter is the first main part of the system. Its job is to keep dirt or other particles out of the air coming into the engine for a clean burn.
The air filter prevents contaminants from getting into the intake systems and clogging up the different parts. It also allows pure oxygen to combine with the gas for a more efficient combustion reaction. This results in better power and engine performance.
Why You Should Consider K&N Filters
When it comes to airflow, more air to your engine equals more power. A K&N filter is much larger than a standard OEM air filter, and this oversized replacement will bring more air into the engine. You will notice an increase in acceleration and added horsepower by upgrading to a K&N filter. K&N uses shorter, fatter tubing to give the air a shorter route to the engine and uses a cotton conical filter specially fitted into a sealed box.
How To Install
Turn off the ignition before you replace your filter. Unlatch the housing for the air filter and remove the old filter. You may have to remove the coupling hose to get into the air cleaner box. Install the K&N air filter to the filter adapter and hold it secure using a hose clamp. Replace the housing and coupling hose.
A clean air filter will have immediate results on your engine’s performance. Shop for K&N filters and parts at Morris 4x4 to give your vehicle a boost.
Jeep Cherokee XJ Axles -K&N Filters
You can take on the roughest slopes without a bit of worry about your Jeep XJ axles holding up to the workout. The adventure of taking your Jeep over extreme terrain is an endorphin rush, leaving you feeling on top of the world. You may not realize just how risky this is to your Jeep if it isn’t set up with the right Jeep Cherokee axle. Luckily, Morris 4x4 Center carries a large selection of different axles from some of the leading brands, keeping something available for everyone’s budget and needs.
If you have questions about which axles are right for your needs and vehicle, simply contact us.One of our team of experts will guide you through our products and answer your questions. Keep your Jeep in its best shape by investing in top-performing Jeep XJ axles. Morris 4x4 Center carries a large selection of different axles, components, and everything you need for installation. Prepare for whatever the road throws your way by installing a high-quality Jeep XJ axle. The aftermarket versions provide you with the solid axle you need for the toughest roads. Anyone looking to add larger tires or suspension lifts needs to consider the type of axles their Jeep is rocking. Stock Jeep Cherokee XJ axles are unable to accommodate heavy loads and some of the rougher two-tracks. We carry some of the best axles to help you on your off-road adventures. You will also find all the axle shafts, housing and components, bearings, and seals that you will need when you dig into the project. Heavier axles provide you with dependability, allowing you to take on any road with confidence.
At Morris 4x4 Center, we carry all the parts you need to keep your Jeep tearing up the road. Whether you are looking for lift kits, exhaust kits, half doors, soft- or hardtops, brake kits, bigger wheels, bumpers, winches, and all the parts in between, we have you covered.
